Marking Traffic; Set Atm-Clp Command; Set Cos Command; Set Discard-Class Command - Cisco 10000 Series Configuration Manual

QoS Features, Commands, and Changes

Marking Traffic

Documentation Reference:
•
•
•
•
•
•
•
•
•
•

set atm-clp Command

Cisco IOS Release: Release 12.0(17)SL
Description: The set atm-clp command was introduced on the PRE2 to set the cell loss priority (CLP)
bit to 1.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB for the PRE2.
Cisco IOS Release: Release 12.2(33)SB
Description: This command was introduced on the PRE3 and PRE4.

set cos Command

Cisco IOS Release: Release 12.2(16)BX
Description: The set cos command was introduced on the PRE2 to set the Layer 2 class of service (CoS)
value of an outgoing packet. This command is available only on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.

set discard-class Command

Cisco IOS Release: Release 12.3(7)XI
Description: The set discard-class command was introduced on the PRE2 to mark a packet with a
discard-class value or to drop a specific traffic type during congestion. This command is available only
on the PRE2.
Cisco 10000 Series Router Quality of Service Configuration Guide
1-36
Chapter 7, "Marking Traffic"
set atm-clp Command, page 1-36
set cos Command, page 1-36
set discard-class Command, page 1-36
set fr-de Command, page 1-37
set ip dscp Command, page 1-37
set ip precedence Command, page 1-37
set mpls experimental Command, page 1-37
set mpls experimental imposition Command, page 1-38
set qos-group Command, page 1-38
Marking Feature, page 1-38
Chapter 1 Quality of Service Overview
OL-7433-09