Network Configuration Parameters
Value Type
Hexadecimal string of the form:
Rc4PasswdInHex/macinHex_12
•
•
Range
Maximum number of characters: 64
Default
0
Voice Configuration Menu Access Code
Not applicable for this parameter.
Related Parameters
•
•
•
Network Configuration Parameters
This section includes the parameters for enabling or disabling the use of a DHCP server to obtain IP
address information, and parameters that you need to statically configure if you disable DHCP:
•
•
•
•
•
•
•
•
•
DHCP
Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
5-8
rc4KeyInHex_n is a hexadecimal string of one to 64 characters.
/macInHex_12 is the optional extension consisting of a forward slash ( / ) followed by the six-byte
MAC address of the Cisco ATA to which the configuration file will be downloaded.
UseTFTP, page 5-4
TftpURL, page 5-5
EncryptKey, page 5-6
DHCP, page 5-8
StaticIp, page 5-9
StaticRoute, page 5-9
StaticNetMask, page 5-10
NTPIP, page 5-10
AltNTPIP, page 5-11
DNS1IP, page 5-11
DNS2IP, page 5-12
VLANSetting, page 5-12
1—Enable DHCP
0—Disable DHCP
Chapter 5
Parameters and Defaults
OL-4804-01