Table of Contents
Advertisement
Software Features
•
•
•
Additional Supported Signaling Protocols
In addition to MGCP, the Cisco ATA supports the following signaling protocols:
•
•
•
If you wish to perform a cross-protocol upgrade from MGCP to another signaling image, see the
"Upgrading the Signaling Image from a TFTP Server" section on page
Other Supported Protocols
Other protocols that the Cisco ATA supports include the following:
•
•
•
•
•
•
•
•
•
•
Cisco ATA MGCP Services
For a list of required MGCP parameters as well as descriptions of all supported Cisco ATA MGCP
services and cross references to the parameters for configuring these services, see
"Cisco ATA-Supported MGCP Services."
These services include the following features:
•
•
•
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for MGCP (version 3.0)
1-6
G.729A
G.729B
G.729.AB
Skinny Client Control Protocol (SCCP)
H.323
Session Initiation Protocol (SIP)
802.1Q VLAN tagging
Cisco Discovery Protocol (CDP)
Domain Name System (DNS)
Dynamic Host Configuration Protocol (DHCP)
Internet Control Message Protocol (ICMP)
Internet Protocol (IP)
Real-Time Transport Protocol (RTP)
Transmission Control Protocol (TCP)
Trivial File Transfer Protocol (TFTP)
User Datagram Protocol (UDP)
Two MGCP endpoints per Cisco ATA
Two connections per MGCP endpoint
Multiple audio codecs
Events and signals available in MGCP software packages
Automatic MGCP version detection
Caller ID generation
Chapter 1
Cisco Analog Telephone Adaptor Overview
7-1.
Chapter 4,
OL-4803-01
Advertisement
Table of Contents
