Table of Contents
Advertisement
4.12 5865-3 / 5865-4 LED Annunciator Installation
The 5865-3 and 5865-4 are LED annunciators. The 5865-4 has 30 mappable LEDs, remote silence and reset key switches, and a general
system trouble LED. The 5865-3 has 30 mappable LEDs only. These are arranged as 15 pairs of red (typically used for alarm) and yel-
low (typically used for trouble) LEDs.
Installation of the 5865-5 and 5865-4 is identical. The key switches and the trouble LED follow the behavior of other system annuncia-
tors and do not require any installation steps. The following sub-sections describe how to install the 5865-3 and 5865-4 hardware. Refer
to Section 9 for programming information.
NOTE: This manual uses "5865" when referring to aspects of the 5865-3 and 5865-4 that are common to both models.
4.12.1 5865 Connection to Panel
The 5865 connects to the panel via the SBUS. Make connections as shown in Figure 4.40. After the 5865 is connected to the panel, it
must be added to the system. This programming step is described in Section 4.13.
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Figure 4.39 5865-3 and 5865-4 Assembly (front view)
Supervised
Power Limited
Figure 4.40 5865 Connection to the FACP
53
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
