2: Model 6855 Connection To The Panel; 6860 Remote Annunciator Installation; 1: Mounting The 6860 - Honeywell Silent Knight SK318PT Installation And Operation Manual

4.6.2 Model 6855 Connection to the Panel
Connect the 6855 to the panel as shown in Figure 4.21.

4.7 6860 Remote Annunciator Installation

The optional Model 6860 Remote Annunciator, is shown in Figure 4.22. The 6860 can be surface or flush mounted.
6860 installation involves the following steps:
1. Make sure power is off at the panel.
2. Mount the 6860 in the desired location (see Section 4.7.1).
3. Connect the 6860 to the panel (see Section 4.7.2).
4. Use the DIP switches on the back of the 6860 to assign an SBUS ID# to the 6860 (see Section 4.13.1).
5. The 6860 module must be added to the system through programming. JumpStart AutoProgramming will add the module
automatically (see Section 8.1).
4.7.1 Mounting the 6860
This section of the manual describes mounting the remote annunciator. The annunciator can be flush or surface mounted.
42
Figure 4.21 Model 6855 Connection to the Panel
Figure 4.22 6860 Remote Annunciator, Front View
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Supervised
Power Limited