Honeywell Silent Knight SK318PT Installation And Operation Manual page 28

EVS-LOC Local Operating Console
(includes 6860, RVM & SW-24)
EVS-100W 100W amplifier
EVS-100WBU backup daughter card
Total System Current
Network Cards
SK-NIC Network Interface Card
SK-FML Fiber Optic Multi Mode
SK-FSL Fiber Optic Single Mode
Wireless Modules
WSK-WGI Wireless Gateway
Auxiliary Devices
IPDACT-2 IP Communicator
IPDACT-2UD IP Communicator
CELL-MOD/CELL-CAB-SK
Auxiliary Devices Current
Notification Appliance Circuits
5495/5499 Power Supply
Notification Appliances Current
Total current ratings of all devices in system (line A + line B + C)
Total current ratings converted to amperes (line D x .001):
Number of standby hours:
Multiply lines E and F.
Alarm sounding period in hours. (For example, 5 minutes = .0833 hours)
Multiply lines E and H.
Add lines G and I.
Multiply by the Derating Factor
1. The FACP can only support 5 devices w/LED's on. This current draw has been added to the panels alarm current.
2. The SK-DUCT housing contains a vacant mount for a SK-RELAY (sold separately). Current draw for the SK-RELAY is
calculated by increasing the SK-RELAY row of the calculation sheet by one for each SK-RELAY used with a SK-DUCT.
3. SK-BEAM-T draws a maximum of 500mA from Auxiliary power only when the test feature is used. this should be considered
when determining auxiliary power capacity but not calculated into current requirements for day to day operation.
4. If using door holders, you do not need to consider door holder current for alarm/battery standby, because power is removed
during that time. However, during normal operation, door holders draw current and must be included in the 6.0A total current
that can be drawn from the panel.
5. Use next size battery with capacity greater than required.
6. Total does not include isolator devices or accessory bases.
24
Device # of Devices
(4 max.)
(4 max.)
(4 max.)
(1 Max.)
(1 Max.)
(1 Max.)
4
Refer to devices manual for current rating.
(1 max.)
(1 max.)
Refer to device manual for current rating.
5
Table 3.2 Current Draw Worksheet for SK SLC Devices
Current per Device
Standby:
Alarm:
Standby/Alarm:
Standby/Alarm:
Standby/Alarm:
Standby/Alarm:
Standby/Alarm:
Max current using ext supply
Max current SLC Power
Standby:
Alarm:
Standby:
Alarm:
Standby:
Alarm:
Alarm/Standby:
Alarm/Standby:
Alarm/Standby:
Alarm/Standby:
24 VDC One input circuit:
Both input circuits:
Alarm:
Alarm:
Alarm:
Alarm:
Total standby AH
Total alarm AH
Total ampere hours
required
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Standby
Current
100mA mA
150mA
10mA mA
10mA mA
21mA mA
53mA mA
79mA mA
40mA mA
24mA mA
93mA mA
136mA
98mA mA
155mA
55mA mA
100mA
mA mA
mA mA
mA mA
mA mA
15mA
30mA
mA
mA
mA
mA
mA
A
H
AH
AH
x 1.25
Alarm
Current
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
A
H
AH