Surface Mounting; 2: Model 5860 Connection To The Panel - Honeywell Silent Knight SK318PT Installation And Operation Manual

Surface Mounting

The 5860 can be mounted directly to a surface or can be attached to a single, double, or four-square electrical box. The Model
5860TG/TR trim ring kit is available for use when surface mounting.
1. Drill holes in the surface to match the screw holes on the back box.
2. Fit the trim ring over the back box.
3. Attach the back box to the surface using screws provided.
4. After the annunciator wiring to the panel has been completed (described in Section 4.5.2), replace the electronic assembly in the
back box. Place the bezel over the back box and tighten the set screws on the bezel.
4.5.2 Model 5860 Connection to the Panel
Connect the 5860 to the panel as shown in Figure 4.15.
38
Figure 4.15 Model 5860 Connection to the Panel
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Supervised
Power Limited