Table of Contents
Advertisement
12.5 esserbus
®
As a loop device on the loop, the esserbus
LED activation (e.g. for a panel). The outputs can be used with positive or negative switching. Service and
programming software tools 8000 is used for configuration.
The esserbus
®
transponder requires an external power supply. The external power supply can be programmed
in monitored mode.
The maximum line length from the transponder to the external device is up to 100 m.
There is also the option of operating the transponder with the loop isolator (Part No. 788612).
Fig. 51: esserbus
®
transponder 32 LED
Monitored control acc. to EN 54 is not possible. Operation on the FlexES Control or Compact FACP
only in conjunction with the power converter (Part No. 781336).
Specifications
Loop
Rated voltage
Rated current
External power supply
Operating voltage
Quiescent Current
LED outputs
Properties
Switching mode
Max. length of connection cable
Ambient temperature
Storage temperature
Humidity
Protection rating
Weight
Dimensions (w x h x d)
Specification
VdS approval
Declaration of Performance
For further information and accessories refer to product catalogue and documentation of the devices.
TI 798960.GB0 / 04.20
transponder 32 LED (Part No.808611.10)
®
transponder enables the implementation of 32 outputs for direct
:
8 V DC ... 42 V DC
:
approx. 50 µA @ 19 V DC
:
10 V DC ... 15 V DC
:
approx. 3 mA @ 12 V DC
:
12 V DC / 10 mA
:
plus/minus switching
:
max. 100 m (Ri = 1 kΩ)
:
max. 3 m (Ri = 0 Ω)
:
-10 °C ... +50 °C
:
-25 °C ... +75 °C
:
≤ 95 % rel. humidity (no condensation)
:
IP 40 (with housing)
:
approx. 95 g
:
150 x 82 x 20 (mm)
:
EN 54 - 17:2005/-18:2005
:
G 206044
:
DoP-20611130701
Periphery components for ESSER FACP
Features
•
Only one loop address is needed per transponder
•
Max. 100 transponders per FACP
•
Max. 32 transponders per loop
Max. 32 transponders per detector zone
•
83
Advertisement
Table of Contents
