Table of Contents
Advertisement
4.
Place the trim ring over the back box as shown in Figure 4.27.
5.
Attach the door assembly to the back box using screws provided.
6.
After the SBUS wiring to the annunciator is complete (described in Section Figure 4.7.2), replace the electronic assembly in the
back box. Place the bezel over the back box and tighten the set screws on the bezel.
4.7.2 6860 Connection to the Panel
Connect the 6860 to the panel as shown in Figure 4.28.
Supervised
power limited
4.8 5815XL Installation
The 5815XL SLC expander lets you add 127 SD addressable devices The maximum number of SLC SD devices per panel is 635. The
number of 5815XL's is limited by the maximum number of SBUS devices.
NOTE: 5815XL will only support SD SLC devices.
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Figure 4.27 Installing Trim Ring
Figure 4.28 Model 6860 Connection to the Panel
45
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
