Table of Contents
Advertisement
Available Format choices are:
Communicator Reporting Table
The Communicator Report Table specifies event reporting for each panel on the communication link. Each row in the table specifies a
panel, event types to report, primary and backup receiver numbers, and report by point or zone. Associated with the receivers are account
number and daily test option. The table can have up to 99 rows.
1.
From the main menu.
2.
Select 6 for Network Programming.
3.
Press 6 to enter Communicator Options menu.
4.
Select 4 for Communicator Reporting Table.
5.
Press * to add rows, Press ENTER to edit data
6.3 Voice Options
6.3.1 Edit Timers
1.
Enter the installer code. The panel will automatically go to the main menu.
2.
Select 6 for Network Programming.
3.
Select 7 for Voice Options.
4.
Choose Site.
5.
Select 1 for Edit Timers
Control Lockout
The Control Lockout countdown timer is set to the programmed value when an LOC gains EVS Control. The timer starts over upon any
key press at the EVS Control LOC. While the Control Lockout timer is active, an LOC of equal priority must request EVS control. The
Control Lockout timer is cleared when EVS Control is relinquished. The Control Lockout timer does not apply to EVS Super User con-
trol.
Select Immediate/Timer/Never
Range 0-720 min/0-59 sec
Auto Reset EVS MIC Triggered Event
If the Timer is selected, the event will automatically reset after being active for the programmed time. If Event Disabled is selected, the
event will not be allowed to be activate from an LOC Station. Selecting Never will require an emergency system reset to be performed to
reset the event.
Select Never/Timer/Event Disabled, Range from 1-240 min
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Reporting Format
Contact ID
SIA500
Ethernet
Cellular
eVance
UNUSED
SIA8
SIA20
Figure 6.1 Communicator Reporting (4x20 screen)
81
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
