2: 5865 Mounting; Configuring Sbus Modules; 1: Assigning Sbus Module Ids - Honeywell Silent Knight SK318PT Installation And Operation Manual

4.12.2 5865 Mounting
Mount the 5865-4 to a standard 4-gang electrical box. Mount the 5865-3 to a standard 3-gang electrical box. In Figure 4.41, the 5865-4
attached to a 4-gang box is used as an example.
The 5865 ships with a set of zone description labels that can be inserted into the 5865 board assembly. These labels can be used in a type-
writer or can be written on by hand. Slide the labels under the plexiglass as shown in Figure 4.42. The LEDs will show through the label
when illuminated.

4.13 Configuring SBUS Modules

This section describes how to configure any system hardware modules that have been added to the system.
4.13.1 Assigning SBUS Module IDs
When installing a hardware module (see Table 4.1 for a list of compatible devices), you must use the DIP switches on the module to
assign an ID# to the module. Address zero is an invalid address and is not allowed.
54
Figure 4.41 5865 Mounting Example
TOP
Zone 1
1st Flr South
Labels can be hand or type written.
Zone 2
Slide label behind plexiglass and
1st Flr West
in front of LED board, as shown in
Zone 3
the diagram. LEDs will shine through
2nd Flr West
label when illuminated.
Zone 4
2nd Flr East
Zone 5
3rd Floor
Figure 4.42 Inserting Zone Description Labels
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
SILENCE
TROUBLE
RESET