12: View Status Of A Point; 13: View Alarms Or Troubles; 14: System Information - Honeywell Farenhyt Series Installation And Operation Manual

5. A screen similar to those shown in Figure 10.3 will display.
You can print detector status up uploading the detector status to and printing from HFSS Honeywell Fire Software Suite.
10.4.12 View Status of a Point
1. From the Main Menu, select 2 for Point Status.
2. From the list that displays, press ENTER to select the module where this point is located. Next, enter the point to display. The
screen that displays will show you if the point has a trouble and will provide sensitivity compliance information. (See Section
10.4.11 for complete information about detector sensitivity compliance.)
10.4.13 View Alarms or Troubles
When the system is in alarm or trouble, you can press the down arrow to view the location of an alarm, supervisory or trouble.
10.4.14 System Information
1. From the Main Menu, press 8 to access the System Information menu.
About Panel

Press 1 to access About Panel to view the panel model, serial number and system version number and date.
Send/Receive firmware updates

The IFP-300/ECS has the ability to be updated in the field. The latest IFP-300/ECS Firmware Update Utility can be downloaded from
the Farenhyt Web Site. Once a panel has been updated using the Firmware Update Utility, you can use Send/Receive firmware updates to
propagate the firmware to the other panels in the network.
1. Press 2 to send a firmware update or press 3 to receive a firmware update from the System Information menu. Available panels are
listed in the menu.
2. Use the up or down arrow key to select a panel to send/receive an update to/from. Press ENTER to start the update process.
Feature Activation

This menu is used to activate/register additional features.
1. Press 4 from the System Information menu. This will bring up the Feature Activation menu.
2. Press 1 to enter a six digit activation code or press 2 to review features already activated in this panel.
IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Figure 10.3 Checking Detector Sensitivity Compliance
138