Surface Mounting - Honeywell Farenhyt Series Installation And Operation Manual
Addressable fire alarm control system emergency communication system
Hide thumbs
Also See for Farenhyt Series:
- Manual (176 pages) ,
- Installation and maintenance instructions (4 pages) ,
- Installation instruction (2 pages)
Table of Contents
Advertisement
4.
Attach the annunciator and door assembly to back box as shown in Figure 4.12 using the supplied screws.
Surface Mounting
The Model RA-100TR red trim ring and RA-2000GRAYTR gray trim ring kits are available for use when surface mounting the RA-
2000.
1.
Remove the desired knock out. See Figure 4.11.
2.
To properly mount the back box, insert a single screw into the key shaped mounting hole. Do not tighten all the way. See
Figure 4.13.
Place a level on top of the back box, with the back box level insert the rest of the mounting screws
3.
Run wires to the control panel.
39
Figure 4.23 Attaching Annunciator / Door Assembly to Backbox
Key Shaped
Mounting Hole
Figure 4.24 Back Box Surface Mount Holes
IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Back Box
Mounting Holes
.
Advertisement
Table of Contents
Troubleshooting
