Honeywell Vibrex 2000 User Manual page 7

5.4
5.4.1
5.4.2
5.4.3
5.4.4
5.4.5
5.5
5.5.1
5.5.2
5.5.3
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
Propeller Balancing (Generic) ............................................ 96
Propeller Balance Setup ................................................ 99
5.4.1.1 Entering Aircraft IDs
5.4.1.2 Selecting Channels
5.4.1.3 Entering Horsepower
5.4.1.4 Setting Sensitivity
5.4.1.5 Saving Corrected Propeller Configurations (EV2K+
only)
5.4.1.6 Multiple Propeller Feature
Acquiring Balance Readings ......................................... 112
5.4.2.1 Annotating the Reading
5.4.2.2 Balance Quality Indicator
Obtaining Balance Solutions ......................................... 117
5.4.3.1 Application Guidelines
5.4.3.2 Using the Propeller Protractor
5.4.3.3 Changing Performed Solutions
Finishing Propeller Balance .......................................... 122
5.4.4.1 If Unable To Use Weight Azimuth
Reviewing Balance Histories ........................................ 124
5.4.5.1 Reviewing Propeller Balance Measurements
5.4.5.2 Reviewing Other Balance Measurements
5.4.5.3 Reviewing Spectrum Peak Measurements
5.4.5.4 Reviewing Spectrum Order Analysis
5.4.5.5 Clearing Runs, Measurements, and Lists
Helicopter Rotor Track and Balancing (Generic) ............. 129
Main Rotor Track .......................................................... 132
5.5.1.1 Main Rotor Track (Strobex) (V2K and V2K+)
5.5.1.2 Main Rotor Track (Strobex) (EV2K+)
5.5.1.3 Main Rotor Track (FasTrak®) (EV2K+ Heli Only) 136
5.5.1.4 Saving or Removing User Track Configurations
(EV2K+ Only)
Main Rotor Balance - Paper Charts (All units) ............. 144
Using the Rotor Protractor............................................. 145
5.5.3.1 Counter-Clockwise Rotor Correction
13841 Rev A
vii
99
100
101
104
107
109
114
114
117
118
121
123
126
127
128
129
129
132
134
141
151