2. Run the prop at its normal high power/torque rating.
► B A L C H A N : < 1 A >
► E N T E R M E A S M A N U A L L Y
3. If the moveline is over 0.4 IPS the last line of the main
4. Press START to continue. At this point the measurement
5. The
6. Once saved the Moveline Check run can be reviewed
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
acquire the point. Alternately, the measurement may be
entered manually using
Press the
TAKE HI PWR/TORQUE
acquire the measurement similar to the low power menu.
M O V E L I N E C H E C K R u n 1
M E A S : L O W P W R / T O R Q U E
i f o k , p u s h S T A R T
moveline menu will show: Moveline= 0.42 IPS-HI.
Correct the problem using manufacturer's procedures.
can be annotated and saved using the following screen.
R U N 1 M O V E L I N E C H E C K
2 3 F E B 1 3 1 0 : 5 0 : 1 5
► [ A N N O T A T E ]
► S A V E R U N 1 o f 8
d o n ' t s a v e , p u s h S T A R T
SAVE RUN
and printed similar to other logs using the REVIEW and
PRINT hard keys.
Chapter 5 – General Operation
ENTER MEAS MANUALLY.
context must be pushed to save the run.
13841 Rev A
189
context key and