Chapter 5 – General Operation
NOTE: This handy option allows you to reuse the
previous measurement for a different solution type. For
example, if you flew at 100 KIAS and realized you had
accidentally selected the Hover measurement. This
option can also be used for training, demos or checking
out previous solutions. It is especially useful if you
choose to build your own chart by editing the factory
coefficients and you want to test the results.
Exiting from the manual entry screen by pressing
will take you to step 6 exactly the same as if you
START
had actually taken the measurement. The RPM will be
displayed as 0 to let you know that this was a manually
entered measurement.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
169