Table of Contents
Advertisement
RUN 1 PROP MEAS
08APR00 09:31:08 #1A
► [ANNOTATE]
0.15 IPS @
► REDO MEAS
solution push START
4. If one or more readings become suspect for any reason, the
user may retake a reading by pressing the
context key. This action automatically erases the former
reading.
CAUTION: Pressing
(undoes or erases) the measurement.
5. If the current reading is correct, press
the next screen.
NOTE: High-horsepower, coarse pitch propellers may stall
at a maximum static RPM. Do not attempt a balance with
the propeller stalling, because the resulting balance
reading in this situation is inaccurate. A propeller is
stalling if there is a noticeable change in the propeller's
sound, from what the user normally hears.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
480 RPM
ID:
Chapter 5 – General Operation
7:29
-1
cancels
GO BACK
START
13841 Rev A
113
DATE, TIME, AND
CHANNEL NUMBER.
USE TO ENTER
NOTES TO ONE'S
SELF
RPM (AZIMUTH),
IPS (VIBRATION),
AND PHASE
MEASUREMENTS
SELECT TO START
THE RUN OVER AND
RETAKE A
MEASUREMENT
REDO MEAS
to advance to
Advertisement
Chapters
Table of Contents
