Honeywell Vibrex 2000 User Manual page 15


Enter the number of blades to be tracked and observe the
targets.
Enhanced Vibrex 2000 Plus

Press the

Insure that the proper helicopter model is selected.

Press the

Enter the number of blades to be tracked (if incorrect) and
observe the targets.
FasTrak

Install the magnetic pickup, FasTrak
Connect the magnetic pickup to MAG PU A. Connect the
FasTrak

Power up the Vibrex unit.

Press the
Menu screen.

Operate the aircraft in the desired condition.

Press the

Insure that the proper helicopter model is selected.

Press the

Press the
readings.

Press the
Printing

Connect the Vibrex unit to the printer using the appropriate
serial interface cable.

Power up the Vibrex unit and select

Select the reading or reading set wanted to print then press
START
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
context key.
TRACK
STROBEX context key.
®
(EV2K+ Helicopter Only)
®
to MAG PU B.
TRACK & BALANCE
TRACK context key.
context key.
FasTrak
key twice to acquire and observe the track
START
START key to obtain a solution.
or PRINT .
13841 Rev A
®
and mounting bracket.
context key from the Main
.
PRINT
xv
Quick Reference Guide