Table of Contents
Advertisement
Chapter 5 – General Operation
4. The next screen allows you to save the edited chart, either
under the existing name or a new name. Up to ten edited
charts may be saved.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
non-equally spaced adjustment points.
Note that even though some components (such as 2-
bladed tail rotors) may have "non-orthogonal"
adjustment points – for example tip weight and chord
weight – these can still be edited with the EV2K+. This
is because each change type is edited separately and
each is equally spaced - 180° apart – within this
specific type.
Press the
RESTORE/RESET FIELD
original settings.
Press the
START
?
E D I T C H A R T
► S A V E C H A R T I N M O D E L
[ A - 1 0 9 E P o w e r ]
► R E M O V E U S E R C H A R T
t o q u i t , p u s h S T A R T
It is strongly recommended that you change the model
name somehow so that user edited charts can be
differentiated from factory charts.
Press the
SAVE CHART IN MODEL
and save the model name.
CAUTION: Saving is an explicit process. Be sure to
press the
SAVE CHART IN MODEL
your changes. If you press the
key to complete editing process.
4 o f 4
START
13841 Rev A
184
to return to the
context key to edit
context key to save
key your
Advertisement
Chapters
Table of Contents
