Table of Contents
Advertisement
Strobex Model
135M-10, -10A, -10B, -10C and -12 12 or 24 Vdc
135M-11
NOTE: The Strobex does not operate on a 12V battery but
does work on an active (charging) 12-Vdc buss. The
voltage required to operate the Strobex is approximately
13.5V.
7. From the Main Menu screen, press the
context key to acquire a track reading. The Track and
Balance screen displays (see below).
► ACQUIRE BAL CH:1A
► ACQUIRE BAL CH:2A
► STROBEX TRACK
► CHANGE BAL CHANNELS
Press the
turning, the magnetic pickup RPM displays in the lower left of
the Vibrex unit screen.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
STROBEX TRACK
13841 Rev A
Chapter 5 – General Operation
Power Required
24 Vdc only
TRACK & BALANCE
context key. While the rotors are
133
PRESS TO START
COLLECTING DATA
PRESS TO BEGIN
STROBE TRACKING
Advertisement
Chapters
Table of Contents
