Table of Contents
Advertisement
Chapter 5 – General Operation
6.
A screen will show the desired flight regime, measurement
direction, channel number and desired RPM. Ensure that the
measurement information is correct. Use the
to change the selections if they are incorrect.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
Press
RESET ALL SETTINGS
defaults.
Press the
START
collection sequence.
Be sure the actual RPM is within several percent of the
desired RPM shown on the screen. This is especially
critical for some ground idle regimes and tail rotors.
Press the
START
A progress screen
?
E N T E R M E A S U R E M E N T
► [ 0 0 . 0 0 ] I P S
a t
► [ 1 2 : 0 0 ] C L O C K A N G L E
► R E C A L L P R E V M E A S
i f O K , p u s h S T A R T
The
ENTER MEAS MANUALLY
to manually enter a measurement. You can enter any
measurement or recall the previous measurement using
the
RECALL PREV MEAS
to reset settings to their
key to initiate the measurement
key to initiate the actual measurement.
e shown in step 6.
will b
gives the unique ability
context key.
13841 Rev A
168
key
GO BACK
Advertisement
Chapters
Table of Contents
