Honeywell Vibrex 2000 User Manual page 66

Chapter 3 – Getting Started
Printing Helicopter Balance Run Results (EV2K+ Heli
Only) -
TYPE<HELICPTR RUNS>
<CURRENT RUN>
<CURRENT SESSION>
<ALL RUNS>
Printing Aircraft (AC) Charts (EV2K+ Only) -
modified balance charts are printed as soon as the
key is pressed. These charts are specific to a given model,
component, regime, change type and sensor direction. Only
charts specifically modified by the user (whether by hand editing
or auto-correction) are printed.
CAUTION: It is strongly recommended that if a user modifies
the factory charts, that this print function is used to record the
results in the event that the EV2K+ batteries are changed or
otherwise losses internal memory.
Printing Helicopter FasTrak
Only) -
TYPE<FASTRAK>
<CURRENT RUN>
<CURRENT SESSION>
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
The user has the following choices under the
The user has the following choices under the
context key:
context key:
Prints the latest run stored to memory.
Prints all the runs and adjustments for
the latest helicopter balance job in
memory.
Prints all helicopter balance runs
stored to memory.
®
Results (EV2K+ Heli
Prints the latest run stored to memory.
Prints all the runs and adjustments for
the latest FasTrak
memory.
13841 Rev A
50
The user
context
PRINT
®
tracking session in