Honeywell Vibrex 2000 User Manual page 14

Quick Reference Guide
Spectrum Analysis

Install the velocimeter in the desired location for
measurement.

Power up the Vibrex unit.

Press the

Select the velocimeter channel and azimuth sensor channel
(if used).

Select the RPM range of interest.

Operate the aircraft at the desired condition for taking
measurements, then press

Press
Balance Reading

Install the velocimeters and photocell, as desired, for the
aircraft to be balanced.

Power up the Vibrex unit.

Press the
Menu screen.

Operate the aircraft in the desired condition.

Press the desired channel to take measurement input.

Press
Strobex Track

Install the Photocell (or magnetic pickup), Strobex, and
retro- reflective targets to be viewed.

Power up the Vibrex unit.

Press the
Menu screen.

Operate the aircraft in the desired condition.
Vibrex 2000 and Vibrex 2000 Plus

Press the
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
SPECTRUM ANALYSIS
to save.
START
TRACK & BALANCE
to save.
START
TRACK & BALANCE
STROBEX TRACK
context key.
.
START
context key from the Main
context key from the Main
context key.
13841 Rev A
xiv