Right Handlebar Switch Inspection; Brake Light Switch - Honda CRF1000 Shop Manual

dummyhead dummyhead
LIGHTS/METERS/SWITCHES
RIGHT HANDLEBAR SWITCH
INSPECTION
Remove the right middle cowl (page 2-6).
Disconnect the following:
– CRF1000/A: 8P (Gray) connector [1]
– CRF1000D: 8P (Gray) [1] and 6P (Black) [2]
connectors
Check for continuity between the wire terminals of the
handlebar switch connector in each switch position.
Refer to the wiring diagram for the terminals and switch
status.
– CRF1000 (page 24-2)
– CRF1000A (page 24-3)
– CRF1000D (page 24-4)

BRAKE LIGHT SWITCH

FRONT
Disconnect the front brake light switch connectors [1]
and check for continuity between the terminals.
There should be continuity with the brake lever applied,
and there should be no continuity with the brake lever
released.
REAR
Remove the connector cover (page 5-8).
Disconnect the rear brake light switch 2P (Gray)
connector [1].
22-24
CRF1000D shown:
[2]
CRF1000D shown:
[1]
CRF1000D shown:
[1]
[1]