Tank Rear Cover Removal/Installation; Skid Plate (Crf1000A/D) Removal/Installation; Left Rear Cover Removal/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
TANK REAR COVER
REMOVAL/INSTALLATION
Remove the main seat (page 2-4).
Remove the trim clips [1].
Remove the tank rear cover [2].
Installation is in the reverse order of removal.
SKID PLATE (CRF1000A/D)
REMOVAL/INSTALLATION
Remove the bolts [1], washers [2], and collar [3].
Remove the skid plate [4].
Installation is in the reverse order of removal.
• Align the right rear grommet [5] of the skid plate with
the boss [6] of frame.
TORQUE: 26 N·m (2.7 kgf·m, 19 lbf·ft)
LEFT REAR COVER
REMOVAL/INSTALLATION
CRF1000/A: Remove the gearshift arm (page 12-21).
Release the sidestand wire clip [1] from the left rear
cover [2].
Release the sidestand wire from the left rear cover wire
guide.
Remove the bolts [3], left rear cover and drive chain
guide plate [4].
Installation is in the reverse order of removal.
• Align the hole of plate with the boss of the cover.
• Route the wires properly (page 1-26).
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
2-10
[1]
[2]
[4]
[6]
[2]
[2]
[3] [2]
[2]
[1]
[5] [3]
[4] [1]