Windscreen Removal/Installation; Knuckle Guard (Crf1000A/D) Removal/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
WINDSCREEN
REMOVAL/INSTALLATION
Remove the socket bolts [1], plastic washers [2], rubber
washers [3], and windscreen [4].
Remove the well nuts [5] and cowl stay covers [6] if
necessary.
Installation is in the reverse order of removal.
• When installing the cowl stay cover, set the stay
cover boss [7] into the front cowl stay hole [8].
TORQUE: 0.42 N·m (0.04 kgf·m, 0.3 lbf·ft)
KNUCKLE GUARD (CRF1000A/D)
REMOVAL/INSTALLATION
Remove the handlebar weight bolt (page 17-6).
Remove the socket bolt [1] and knuckle guard [2].
Installation is in the reverse order of removal.
• Install the knuckle guard by aligning its boss [3] with
the hole [4] of the stay.
FRAME/BODY PANELS/EXHAUST SYSTEM
[8]
[7]
[6]
[5]
[4]
[6]
[1]
[2]
[3]
[4]
[1]
[3]
[2]
2-5