Neutral Diode (Crf1000/A) Removal/Installation; Neutral Diode (Crf1000/A) Inspection; Starter Relay (Crf1000D) Removal/Installation; Starter Relay (Crf1000D) Inspection - Honda CRF1000 Shop Manual

dummyhead dummyhead
NEUTRAL DIODE (CRF1000/A)
REMOVAL/INSTALLATION
Remove the main seat (page 2-4).
Open the fuse box cover and remove the neutral diode
[1].
Installation is in the reverse order of removal.
INSPECTION
Check for continuity between the diode terminals.
When there is continuity, a small resistance value will
register.
If there is continuity in direction shown by the arrow, the
diode is normal.
STARTER RELAY (CRF1000D)
REMOVAL/INSTALLATION
Remove the right side cover (page 2-11).
Release the starter relay [1]/cover [2] from the frame
and remove the cover.
Remove the starter relay from the relay connector.
RELAY INSPECTION
Remove the starter relay (page 6-9).
Refer to FI relay inspection (page 4-44).
ELECTRIC STARTER
CRF1000 shown:
A
A
B
C
[1]/[2]
[1]
B
C
6-9