Anti-Lock Brake System (Abs) (Crf1000A/D) Torque Values; Lights/Meters/Switches Torque Values; Other Torque Values - Honda CRF1000 Shop Manual

dummyhead dummyhead
GENERAL INFORMATION
ANTI-LOCK BRAKE SYSTEM (ABS) (CRF1000A/D)
ITEM
Front brake hose clamp mounting
bolt
Rear brake hose clamp mounting
bolt
Rear brake hose guide mounting
screw
Brake hose oil bolt
Brake pipe joint nut
Front wheel speed sensor mounting
bolt
Rear wheel speed sensor mounting
bolt
LIGHTS/METERS/SWITCHES
ITEM
Turn signal light mounting nut
(CRF1000)
License light cover screw
Combination meter mounting screw/
washer
EOP switch (CRF1000/A)
EOP switch terminal bolt/washer
(CRF1000/A)
EOP sensor (CRF1000D)
Ignition switch mounting bolt
Gear position switch mounting bolt
(CRF1000/A)
Sidestand switch mounting bolt
OTHERS
ITEM
Clutch lever pivot bolt (CRF1000/A)
Clutch lever pivot nut (CRF1000/A)
Pillion step bracket mounting bolt
Throttle cable A/B nut
(switch housing side)
*1: Apply locking agent to the threads as shown.
1-20
THREAD
Q'TY
DIA. (mm)
1 6
1 6
3 5
2 10
2 10
1 6
1 6
THREAD
Q'TY
DIA. (mm)
4 6
2 5
4 5
1 PT 1/8
1 4
1 10
2 8
1 6
1 6
THREAD
Q'TY
DIA. (mm)
1 6
1 6
4 8
2 10
TORQUE
N·m (kgf·m,
lbf·ft)
10 (1.0, 7)
10 (1.0, 7)
1.2 (0.1, 0.9) ALOC screw: replace with new
ones.
34 (3.5, 25)
14 (1.4, 10) Apply brake fluid to the threads.
10 (1.0, 7) ALOC bolt: replace with a new
one.
10 (1.0, 7) ALOC bolt: replace with a new
one.
TORQUE
N·m (kgf·m,
lbf·ft)
8.8 (0.9, 6.5)
3.8 (0.4, 2.8)
1.0 (0.1, 0.7) Tapping screw
12 (1.2, 9) Apply sealant to the threads.
See page 22-20
2 (0.2, 1.5)
22 (2.2, 16)
26 (2.7, 19) Replace with a new one.
10 (1.0, 7)
10 (1.0, 7) Replace with a new one.
TORQUE
N·m (kgf·m,
lbf·ft)
1.0 (0.1, 0.7)
5.9 (0.6, 4.4) U-nut
34 (3.5, 25)
1.5 (0.2, 1.1)
6.5 ± 1.0 mm
(0.26 ± 0.04 in)
Apply this area.
The bolt shown is typical.
REMARKS
REMARKS
REMARKS
2.0 ± 1.0 mm
(0.08 ± 0.04 in)
Do not apply this area.