Table of Contents
Advertisement
dummyhead
dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
MUFFLER/EXHAUST PIPE
MUFFLER REMOVAL/INSTALLATION
MUFFLER MOUNTING BOLT
WASHER
MUFFLER ASSEMBLY
MUFFLER BAND BOLTS
17 N·m (1.7 kgf·m, 13 lbf·ft)
EXHAUST OUTER COVER SCREW
9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)
• Always replace the gasket with a new one.
• When installing the muffler, loosely install the mounting bolt, and washer and tighten the muffler band bolts
first to the specified torque, and then tighten the mounting bolt securely.
• Align the slots of the outer cover with the bosses of the exhaust pipe cover C.
2-16
RUBBER WASHER
MUFFLER STAY
GASKET
COLLAR
EXHAUST OUTER COVER
EXHAUST PIPE
OUTER COVER
PAN SCREWS
9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)
Advertisement
Table of Contents
Troubleshooting
