dummyhead
dummyhead
INSTALLATION
Install the parking brake lever assembly [1] by aligning
its end with the paint mark [2] on the handlebar.
Install the holder [3] with its punch mark [4] facing up.
Tighten the upper bolt [5] first, then the lower bolt [6].
Connect the parking brake cable [7] to the brake lever.
Check the brake lock operation (page 3-21).
Connect the parking brake switch connectors [1].
Install the knuckle guard (page 2-5).
Install the rearview mirror (page 17-10).
PARKING BRAKE CALIPER
(CRF1000D)
REMOVAL/INSTALLATION
Remove the parking brake pads (page 19-10).
Release the parking brake cable [1] from the cable stay
[2] of the caliper body and disconnect it from the brake
arm [3].
Installation is in the reverse order of removal.
HYDRAULIC BRAKE
[1]
[2]
[1]
[2]
[1]
[7]
[5]
[3]
[4]
[6]
[3]
19-23