dummyhead
dummyhead
IMMOBILIZER SYSTEM (HISS)
Check for continuity between the PCM 33P (Gray)
connector [1] and ground at the wire side.
CONNECTION: C21 – Ground
TOOL:
Test probe
There should be no continuity.
REMOVAL/INSTALLATION
Remove the top bridge (page 17-22).
Remove the harness cover [1].
Remove the screws [2] and the immobilizer receiver [3].
Installation is in the reverse order of removal.
REPLACEMENT PARTS FOR
PROBLEM
Problem
One Key has been
lost, or additional
spare key is
required
All key has been
lost
ECM/PCM is faulty
Immobilizer
receiver is faulty
Ignition switch is
faulty
Seat lock is faulty
23-12
07ZAJ-RDJA110
Transponder
Immobilizer
Key
receiver
[1]
C21
[3]
[2]
Replacement parts
Ignition
ECM/PCM
switch
assembly
[1]
Seat lock
Key set
cylinder