Audio; System - Cisco D9887B Installation And Configuration Manual

Appendix A
Error/Event List
signal detected.
SD Down-Conversion Error – The conversion to an SD output format from HD

failed because the HD frame rate is not 29.97 (for NTSC) or 25 / 50 (for PAL).
4:2:2 Conversion Error – Generated when chroma format is 4:2:2 and the native

resolution is 1080 and the output is 720, video scaling is not possible.
Video No Sync Error – The video synchronization is not taking place due to the

large difference between the PTS and PCR (> 6 seconds).

Audio

DolbyE Not Decoding Error - The DolbyE PID has been set but is not being

decoded.
Audio (N) Not Decoding Error - Audio Decoder (N) didn't receive a new audio

frame within 3 seconds.
Audio (N) Unknown Error - Audio Decoder (N) does not recognize the audio

stream.

System

Fan Error - The fan is spinning at less than 500 RPM.

Temperature Error - The internal temperature has exceeded 70 Celsius.

DPI Stream Type Locked Error - User is not licensed to decode the selected

stream.
204 78-4043743-01 Rev A