Password Strength; Character Type; Repeats - Cisco D9887B Installation And Configuration Manual

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver

Password Strength

Determines the password strength for access through the Web Client.

Character Type

If set to enable, the Web Client Password will contain at least three of the following
classes: lower case letters, upper case letters, digits, or special characters.
To enable/disable Character Type password requirement, use the following steps:
1 Press the Menu button.
2 Use the Up and Down buttons to move the cursor to "Pwd Strength," then press
the Enter button.
3 Use the Up and Down buttons to move the cursor to "Char Type," then press the
Enter button.
4 Use the Up and Down buttons to change the selection, then press the Enter
button to save the selection.

Repeats

If set to enable, no character in the password can be repeated more than three times
consecutively
To enable/disable No Repeats password requirement, use the following steps:
1 Press the Menu button.
2 Use the Up and Down buttons to move the cursor to "Pwd Strength," then press
the Enter button.
3 Use the Up and Down buttons to move the cursor to "Repeats," then press the
Enter button.
146 78-4043743-01 Rev A