Output Level - Cisco D9887B Installation And Configuration Manual

Output Level

Note: This setting is only available on the Audio Output (Dolby E AES Digital,
Analog) option card.
1 Use the Up and Down buttons to move the cursor to "Level," then press the
Enter button.
2 Use the Up and Down buttons to select the desired level (1-9), then press Enter
to save the selection.
Note: The level 7 is approximately 0 dB (when using a -20 dBFS reference level,
see Appendix E - D9887B Receiver Audio Explanation (on page 241)) and each
number increment is approx. 2.5 dB. Level 9 is approximately +4 dB (when using
a -20 dBFS reference level, see Appendix E - D9887B Receiver Audio Explanation
(on page 241)).
78-4043743-01 Rev A
Audio Output (Dolby E, AES Digital, Analog) Option
45