Network Services - Cisco D9887B Installation And Configuration Manual

Chapter 5 Using the Web Client to Configure the D9887B Receiver

Network Services

If desired, the Network Security can be increased from the default value by disabling
any or all of the Network Services. To change any of the network services, click on
the Window button in the Network Services section. To change any of the network
service settings:
1 Click on the Window button in the Network Services section to edit.
2 A new window will appear in the middle of the screen. Change the settings
desired and then click the Apply button to save the settings.
190 78-4043743-01 Rev A