Cisco D9887B Installation And Configuration Manual page 244

Appendix B
Specifications
Audio Type Standard:
Closed Captions:
Analog Video -
Video Format Standards:
Number of Analog Outputs:
Connector:
Impedance:
Return Loss:
Frequency Response:
H/V Sync:
Composite Video Out –
Number of Outputs:
Connector:
Impedance:
Return Loss:
Frequency Response:
Amplitude:
Display Modes:
Standard:
Format, Frame rate:
Setup (pedestal):
Closed Caption:
CC Standard:
220
Compressed (IEC 60958)
Uncompressed (IEC 61937)
Embedded – EIA-708B or EIA-608B
Line 21 – Enabled/Disabled (selectable) SDI and
Composite controlled simultaneously
SMPTE-274M (1080i)
SMPTE-296M (720p)
SMPTE-253M (480p, 480i)
(reference EIA 770.2 and 770.3)
1 (shared: RGBHV or YPbPr/Composite via breakout
cable)
High Density 15-pin D-sub, female
75 ohms, ±10%, 1 Kohm for syncs
> 20 dB, 30 kHz – 30 MHz
Y = 30 kHz – 30 MHz, ± 0.2 dB ripple
PbPr = 30 kHz – 15 MHz, ± 0.2 dB ripple
4 Vpp into 1 Mohm, positive polarity
1 (NTSC/PAL)
Breakout cable into BNC, female
75 ohms, +/-10%
> 25 dB
DC to 6.0 MHz
140 IRE (1.0 Vpp), +/-2 IRE
Letterbox, cropped, anamorphic
NTSC
ANSI/SMPTE 170M-1994; CCIR656
525 lines, 29.97 Hz (Interlaced)
On/Off, selectable
Enable/Disable, selectable
EIA-608B
PAL
ITU.R.BT.470-6
625 lines, 25.00 Hz
(Interlaced)
78-4043743-01 Rev A