Diagnostics; Processes; Network Interface Information - Cisco D9887B Installation And Configuration Manual

Diagnostics

Processes

This section is primarily used by a Cisco representative to aid in troubleshooting a
problem. By clicking on the "View Processes Window..." hyperlink, under the
"Diagnostics" heading, it will bring up a new window that shows all the running
processes of the D9887B receiver's operating system. There are no user-definable
parameters under this menu.

Network Interface Information

This section displays detailed information about the network portion of the D9887B
receiver. It also allows a new IP address to be set in the unit. To set a new IP address,
use the following steps:
Warning: Use caution when changing IP settings or the unit may be rendered
unreachable.
1 Click the "View Network Interface Window..." hyperlink, under the
"Diagnostics" heading.
78-4043743-01 Rev A

Diagnostics

193