Quad Input Dvb-S/Dvb-S2 Receiver With Lnb Power Option - Cisco D9887B Installation And Configuration Manual

Quad Input DVB-S/DVB-S2 Receiver with LNB
Power Option
General –
Frequency Range:
Number of inputs:
Connector:
Impedance:
Return Loss:
Separation:
RF frequency:
Tuning:
Satellite frequency:
LO frequency:
Packet size:
Transport Stream:
Nyquist root filter roll-off factors:
RF Input Level
Carrier Loop capture range ≤ 5
MSym/ssps:
Carrier Loop capture range > 5
MSym/ssps:
Input RF Spectrum
LNB Power and 22 kHz Tone –
Settings (LNB voltage / tone):
LNB Current:
LNB voltage regulation:
22 kHz Tone:
DVB-S –
Standard:
FEC Code:
78-4043743-01 Rev A

Quad Input DVB-S/DVB-S2 Receiver with LNB Power Option

950 MHz – 2150 MHz
4 (A, B, C and D)
F-81 Type, Female (4)
75 Ohms
> 9 dB
> 50 dB adjacent, > 60 dB non-adjacent
950 MHz to 2150 MHz in 100 kHz steps
Difference between Satellite frequency and LO
frequency
950 – 14500 MHz
0 – 12000 MHz, with presets of 0, 5150, 9750, 10600,
10750 and 11250 MHz
188 bytes
Up to 81 Mbps
.20, .25, .35
-65 dBm to -25 dBm
± 1.08 MHz
± 1.60 MHz
Normal/Inverted Auto Detect
0/off, 13/off, 13/on, 14/off, 14/on, 18/off, 18/on,
19/off, 19/on
> 450 mA DC
± 4%
650 mV (± 250 mV) peak-peak
EN 300 421
Conv. + Reed-Solomon
223