Video Output (2 Sdi, 1 Rgbhv/Ypbpr/Composite) Option - Cisco D9887B Installation And Configuration Manual

Appendix B
Specifications
Video Output (2 SDI, 1 RGBHV/YPbPr/Composite)
Option
General –
Connector:
Impedance:
Output Connectors:
Genlock –
SDI:
Composite:
SDI (Serial Digital Interface) Video Out
–
HD-SDI Standard:
SD-SDI Standard:
Data Bit Rate:
Display Modes:
Embedded Audio Format:
Sample Rates Supported:
Sample Rate Out:
Output Squelch:
Number of Embedded Audio
Channel Pairs:
Audio Types Supported:
Embedded Audio Control:
Audio Type Standard:
214
2 Female BNC
75 ohms ±10%
2 – SDI, 1 – RGBHV/YPbPr/Composite
(Composite/YPbPr output with breakout cable only)
Line and Pixel Adjustment
Line, Pixel, Color Phase Adjustment
SMPTE-92M
SMPTE-274M (1080i and 1080p)
SMPTE-296M (720p)
ITU-BT.601/SMPTE S259M
SD-SDI – 270 Mbps
HD-SDI – 1.485 Gbps
HD: Pillarbars, Cropped, Anamorphic
SD: Letterbox, Cropped, Anamorphic
SD-SDI – SMPTE 272M
HD-SDI – SMPTE 299M
48 kHz
48 kHz
Selectable – Enable/Disable (when no input is
detected, output is muted)
4 (2 groups, each with 2 pairs)
Dolby Digital, MPEG-2 layer 1 and 2, or PCM
Dolby E, with Audio output (Dolby E, AES Digital,
Analog) option
Selectable – "type"/disable (each pair independently
controlled)
Compressed (IEC 60958)
78-4043743-01 Rev A