Cisco D9887B Installation And Configuration Manual page 239

Closed Captions:
Analog Video -
Video Format Standards:
Number of Analog Outputs:
Connector:
Impedance:
Return Loss:
Frequency Response:
H/V Sync:
Options available –
Opt 1:
Connectors:
Length:
78-4043743-01 Rev A
Video Output (2 SDI, 1 RGBHV/YPbPr/Composite) Option
Uncompressed (IEC 61937)
Embedded – EIA-708B or EIA-608B
Line 21 – Enabled/Disabled (selectable) SDI and
Composite controlled simultaneously
SMPTE-274M (1080i and 1080p)
SMPTE-296M (720p)
SMPTE-253M (480p, 480i) (reference EIA 770.2 and
770.3)
1 (shared: RGBHV or YPbPr/Composite via breakout
cable)
High Density 15-pin D-sub, female
75 ohms, ±10%, 1 Kohm for syncs
> 20 dB, 30 kHz – 30 MHz
Y = 30 kHz – 30 MHz, ± 0.2 dB ripple
PbPr = 30 kHz – 15 MHz, ± 0.2 dB ripple
4 Vpp into 1 Mohm, positive polarity
Analog video breakout cable
(5) BNC, male:
R, G, B, Horizontal Sync, Vertical Sync, Pr, Y, Pb, --,
Composite
(1) High density 15-pin D-sub, female
48 inches
215