Ip Address/Subnet Mask/Gateway - Cisco D9887B Installation And Configuration Manual

6 Use the Up and Down buttons to move the cursor to "Control 1" or "Control 2,"
then press the Enter button.
7 Use the Up and Down buttons to move the cursor to "DHCP," then press the
Enter button.
8 Use the Up and Down buttons to change the selection to "off," then press the
Enter button to save the selection.

IP Address/Subnet Mask/Gateway

1 Use the Up and Down buttons to move the cursor to "IP Address," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to change the IP, then press the Enter button to save the selection.
3 The cursor will now be on "Subnet Mask."
4 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to change the Subnet Mask, then press the Enter button to save
the selection.
5 The cursor will now be on "Gateway."
6 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to change the Gateway, then press the Enter button to save the
selection.
78-4043743-01 Rev A
Network Setup
153