Flush Mounting - Honeywell 6820EVS Installation And Optimization Manual

Model 6820 / 6820-EVS Installation Manual

4.6.1.1 Flush Mounting

This section of the manual describes flush mounting.
Follow these steps to flush mount the 6855
1. The back box dimensions are 9-9/32" W x 8-3/8" H. The minimum depth 2". The back box can be mounted
prior to the complete installation of the 6855 using any of the mounting holes shown in Figure 4-17.
2. Remove knockout holes as needed for wires. See Figure 4-18 for backbox knockout locations
Wire Knockouts
3. Wire the Annunciator board to the main control panel. See Figure 4-9.
Mounting Holes
Mounting Holes
Figure 4-17 Back Box Mounting Holes
Wire Knockouts
Figure 4-18 Back Box Knockout Locations
4-15
LS10144-001SK-E
Wire Knockouts