Class A Inputs - Honeywell 6820EVS Installation And Optimization Manual

LS10144-001SK-E
2. Configure the circuit through programming (see Section 9.5).
4.15.2

Class A Inputs

You can connect conventional Class A switches, such as waterflow switches and pull stations, directly to the
Flexput circuits of the control panel.
To install a Class A switch:
1. Wire the Class A switch as shown in Figure 4-46.
2. Configure the circuit through programming (see Section 9.5).
Figure 4-45 Class B Input Switches
Maximum Impedance
per circuit is 50W
Figure 4-46 Class A initiating Switches
4-34
Control Panel Installation
Supervised
Power Limited
UL Listed
EOL 4.7 k
Supervised
Power Limited