Sk-Wgi Wireless Gateway; Power Connections For The Gateway - Honeywell 6820EVS Installation And Optimization Manual

LS10144-001SK-E

7.10 SK-WGI Wireless Gateway

Note: The SK-WGI, as part of the wireless network, has been tested for compliance with the Federal Communi-
cations Commission (FCC) requirements of the United States Government. It has not been evaluated for
use outside the USA. Use of this system outside the USA is subject to local laws and rules to which this
product may not conform. It is the sole responsibility of the user to determine if this product may be legally
used outside the USA.
Note: It is recommended to use the same wire gauge if there are multiple connections to the same terminal.
For more information regarding Gateway wiring instructions, see SWIFT manual LS10036-000SK-E.
7.10.1

Power Connections for the Gateway

The SK-WGI Wireless Gateway acts as a bridge between a group of wireless fire devices and a SLC loop on the
6820/EVS. It is powered by the SLC loops or by a regulated, external 24 VDC UL listed power supply. For
details about wireless devices, system setup, and operation, see the SWIFT
Technology Instruction Manual P/N LS10036-000SK-E.
SK, SD and SWIFT™ Wireless SLC Device Installation
™
Smart Wireless Integrated Fire
7-10