Multi-Site Annunciator And Multi-Site User Access - Honeywell 6820EVS Installation And Optimization Manual

Model 6820 / 6820-EVS Installation Manual
Operation Occurs
Mode When
The RESET
button is
pressed
Reset followed by a
valid code or
rotation of the
key.
An alarm or
trouble
condition has
been silenced
but still exists.
To silence
Silenced alarms and
troubles, press
SILENCE
followed by
the Installer or
User Code or
rotate the key.
10.6.1

Multi-Site Annunciator and Multi-Site User Access

Multi-site Annunciators are unique as they can display the status and event history of all sites they are assigned
to. These displays can be especially useful in guard shacks or security centers. A multi-site display is indicated
by the words "Multi-Site Display" at the top of the idle screen.
1. The F-Macro key is disabled until a multi-site user access code has been entered and a specific site has been
selected.
2. Multi-site Annunciator silencing rules:
• If any new troubles, supervisory, pre-alarms, or alarms are triggered in any assigned sites, Locally
Silenced annunciator will resound.
• If a multi-site annunciator is locally silenced for 4 or 24 hours depending on user selection (see section
9.6.2.6), the locally silenced annunciator will resound.
3. The 6820 or 6820EVS menu system is disabled on a multi-site annunciator. Pressing the Right or Enter keys
will bring you straight into event history for assigned sites. To get into the menu system, a multi-site user
password must be entered and then a site must be selected from the site selection menu. Once this is done
you will have access to the idle screen of that site and the annunciator will temporarily act like a single site
annunciator.
4. A multi-site annunciator will sound the highest priority tone from the sites it is assigned to.
Note: A multi-site display is created in Module programming in the edit properties menu for an 6860, 5860 or
6855 See section 9.2.1.
Note: An annunciator cannot be programmed as a multi-site display when it is associated with an VCM or RVM
in a EVS system.
Note: Status Points, Status Voice Aux 1, Status Voice Aux 2, and Background Music are contained within the Sys-
tem Status event priority.
Note: All fire, emergency and system troubles are prioritized into the Trouble event priority.
Table 10-2: Operation Mode Behavior
System Behavior
All LEDs are on briefly then the LCD displays
"RESET IN PROGRESS". If the reset process
completes normally, the date and time normal
mode screen displays.
SYSTEM SILENCE LED is on. SYSTEM
TROUBLE, SUPERVISORY or GENERAL
ALARM LED (depending on condition) is on.
The annunciator (and any notification devices
attached to the system) will be silenced.
Menus are not available during the reset process.
Press down arrow to view the location of the alarm or
trouble. When the condition no longer exists, the
SYSTEM SILENCED and SYSTEM TROUBLE LED,
SUPERVISORY or GENERAL ALARM LEDs turn off.
10-15
LS10144-001SK-E
In This Mode You Can