Menu System; Main Menu Overview - Honeywell 6820EVS Installation And Optimization Manual

Model 6820 / 6820-EVS Installation Manual
information on editing the banner.
Text of
Internal Banner
Custom Banner
Example

10.3 Menu System

The control panel is easy to operate from the Main Menu. To view the Main Menu press the ENTER or right
arrow key on the control panel or remote annunciator. The Main Menu will appear as shown in Section 10.3.1.
Select the desired option. You will be prompted for as access code if required.
The control panel supports up to 20 access codes. The profile for each access code (or user) can be modified
through the network programming option (see Section 6.2.5 for access code programming).
10.3.1

Main Menu Overview

The chart below is a brief overview of the Main Menu. These options are described in greater detail throughout
this section of the manual.
Main Menu Options
1- System Tests
2- Point Functions
3- Event History
4- Set Time & Date
5- Network Diagnostics
6- Network Programming Access Learn Network, Edit Network Names, Edit Panel ID, Computer Access, Access
7- Panel Programming
8- System Information
Figure 10-4 Banner Display Examples for 6820EVS
Access to Fire Drill, Indicator Test, Walk Tests, Communicator Test, Clear History Buffer,
Manual AlarmNet Registration and Manual Communicator Reset.
Enable/disable points, Point Status, Set SLC Address, Device Locator, and I/O Point
Control.
Display event history on the LCD. See Section 10.4.4 for more information.
Set time and date for the system.
Ping Panel and Data Network Status
Codes, Communicator Options, Voice Options, Sync Network Options.
Brings up a set of menus for programming the panel. These options are described in
detail in Section 9.
Menus to view information about the panel such as model, ID, serial number, revision,
send or receive firmware updates and feature registration activation.
Description
10-3
LS10144-001SK-E