View Status Of A Point; View Alarms Or Troubles; System Information - Honeywell 6820EVS Installation And Optimization Manual

Model 6820 / 6820-EVS Installation Manual
Figure 10-6 Checking Detector Sensitivity Compliance 6820EVS 4x 40 display
You can print detector status by uploading the detector status to and printing from HFSS Honeywell Fire
Software Suite.

10.4.12 View Status of a Point

1. From the Main Menu, select 2 for Point Status.
2. From the list that displays, press ENTER to select the module where this point is located. Next, enter the
point to display. The screen that displays will show you if the point has a trouble and will provide sensitivity
compliance information. (See Section 10.4.11 for complete information about detector sensitivity compli-
ance.)

10.4.13 View Alarms or Troubles

When the system is in alarm or trouble, you can press

10.4.14 System Information

Press 8 from the Main Menu to view the panel model and serial number and system version number and date.
Press the left arrow to return to the main menu.
About Panel
Press 1 to access About Panel to view the panel model, serial number and system version number and date.
Send/Receive firmware updates
The 6820 or 6820EVS has the ability to be updated in the field. The latest 6820 or 6820EVS Firmware Update
Utility can be downloaded from www.silentknight.com. Once a panel has been updated using the Firmware
to view the location of an alarm or trouble.
down arrow
10-9
LS10144-001SK-E