Ethernet Connection; Ac Connection - Honeywell 6820EVS Installation And Optimization Manual

LS10144-001SK-E
4.1.3

Ethernet Connection

Ethernet connection is used for IP communication. For port location see Figure 3-2.
4.2

AC Connection

At installation, connect the AC terminals to the power source as shown in Figure 4-2. It may be necessary for a
professional electrician to make this connection.
Warning: RISK OF ELECTRICAL SHOCK AND EQUIPMENT DAMAGE
Several different sources of power can be connected to this panel. Disconnect all sources of power before servicing. The
panel and associated equipment may be damaged by removing and/or inserting cards, modules or interconnecting
cables while this unit is energized.
The AC terminals are rated at 120 VAC, 60 Hz, 2.7A.
Figure 4-2 120 VAC Power Connection for the 6820 or 6820EVS
4-2
Control Panel Installation