Mapping Overview - Honeywell 6820EVS Installation And Optimization Manual

Model 6820 / 6820-EVS Installation Manual LS10144-001SK-E
8.2

Mapping Overview

This section of the manual is a high level overview of mapping.
Mapping is an important concept with the control panel. In general terms, mapping is assigning or linking events
to outputs that will activate when events occur. You do this by assigning input points to input zones, output points
to output groups and then linking or mapping zones and output groups.
Figure 8-1 is a brief overview of the concept of mapping. The next several pages of the manual show these
subjects in detail.
Figure 8-1 Mapping Overview
Note: Mapping cannot be programmed through annunciators and can only be programmed through HFSS Hon-
eywell Fire Software Suite.
8-3