20
2.
Interfaces
RS-485
Bidirectional interface with "Modulbus" protocol, suitable for ACS-8
Interface range up to 1200 m
Clock/Data
Unidirectional interface
TTL-level, 4 bit code according to DIN 9785, active = LOW
Data protocol ACS-8, ACS-2 and ACT compatible
Interface range up to 200 m
Wiegand
Unidirectional interface
3.
Functional description
The readers are designed for contactless identification of Novar transponders data carriers e.g. ID
chipcards, possible data carriers see Chapt. 9 "Accessories").
A combination of transponder and PIN can be used for performing functions via the keypad.
In order to read a transponder an electromagnetic field with a frequency of 125 kHz is transmitted
from the reader unit. As soon as a transponder enters this field, it transmits a code in the "power
field" to the reader.
The individual code of every transponder renders it unique.
The transmitted code is prepared in the reader so that the connected AC
continue the processing e.g. switching and control functions.
Communication between the reader and AC
interface.
The state is indicated via 3 LEDs (ready, authorized, not authorized). A buzzer is integrated for
acoustical acknowledgement.
4.
Mounting
4.1
Dimensions
Housing back
without electronics
Cable entry
Mounting and Operating Instructions - proX2-reader "Accentic" with keypad
(in mm)
60
central control unit
is via an RS-485 bus or Clock/Data
F
1
2
4
5
7
8
r
0
75
(
central control unit
i
3
6
9
3
32
can